Home Hardware › hillman no 8 flat ss

DAYTON 1L680 Shaft Collar,Clamp,1Pc,5/8 In,SS

Shaft Collar, System of Measurement Inch, Bore Type Round, Bore Diameter 5/8 in, Bore Thread Size Not Applicable, Collar Outside Diameter 1 5/16 in, Inside Height to Flat Not Applicable, Clearance Diameter 1.46 in, Collar Width 7/16 in, Collar... more

DAYTON 1L637 Shaft Collar,Set Screw,1Pc,5/8 In,SS

Shaft Collar, System of Measurement Inch, Bore Type Round, Bore Diameter 5/8 in, Bore Thread Size Not Applicable, Collar Outside Diameter 1 1/8 in, Inside Height to Flat Not Applicable, Clearance Diameter 1.13 in, Collar Width 1/2 in, Collar... more

Manufacturer Varies Flat Washer 18-8 SS 5/8 1.5x.078in 25PK U51410.062.0005

Flat Washer Flat Washer Type Standard Dimensional Standards ASME B18.22.1 Material Stainless Steel Material Grade/Class 18-8 Finish Plain For Screw Size 5/8 in Inside Diameter 0.688 in Outside Diameter 1 1/2 in Maximum Thickness 0.078 in System of... more

Hillman Fas-n-Tite Sinker Nails 8d Sinker Nails 2-3/8 Vinyl C

Vinyl coated smooth shank for easier driving and strong holding powerNot recommended for use in treated lumber or where corrosion is a concernSinker Nail - Smooth Shank - Vinyl Coated - Checkered Flat Head - Thin ShankNails conform to ASTM F1667 and... more

DAYTON 1L722 Shaft Collar,Clamp,2Pc,1-1/8 In,SS

Shaft Collar, System of Measurement Inch, Bore Type Round, Bore Diameter 1 1/8 in, Bore Thread Size Not Applicable, Collar Outside Diameter 1 7/8 in, Inside Height to Flat Not Applicable, Clearance Diameter 2.05 in, Collar Width 1/2 in, Collar... more

DAYTON 1L717 Shaft Collar,Clamp,2Pc,1/2 In,SS

Shaft Collar, System of Measurement Inch, Bore Type Round, Bore Diameter 1/2 in, Bore Thread Size Not Applicable, Collar Outside Diameter 1 1/8 in, Inside Height to Flat Not Applicable, Clearance Diameter 1.2 in, Collar Width 13/32 in, Collar... more

DAYTON 1L718 Shaft Collar,Clamp,2Pc,5/8 In,SS

Shaft Collar, System of Measurement Inch, Bore Type Round, Bore Diameter 5/8 in, Bore Thread Size Not Applicable, Collar Outside Diameter 1 5/16 in, Inside Height to Flat Not Applicable, Clearance Diameter 1.4 in, Collar Width 7/16 in, Collar... more

DAYTON 1L725 Shaft Collar,Clamp,2Pc,1-1/2 In,SS

Shaft Collar, System of Measurement Inch, Bore Type Round, Bore Diameter 1 1/2 in, Bore Thread Size Not Applicable, Collar Outside Diameter 2 3/8 in, Inside Height to Flat Not Applicable, Clearance Diameter 2.48 in, Collar Width 9/16 in, Collar... more

RULAND SP-6-SS Shaft Collar,Clamp,2Pc,3/8 In,303 SS

Shaft Collar, System of Measurement Inch, Bore Type Round, Bore Diameter 3/8 in, Bore Thread Size Not Applicable, Collar Outside Diameter 7/8 in, Inside Height to Flat Not Applicable, Clearance Diameter 1.03 in, Collar Width 11/32 in, Collar... more

DAYTON 1L640 Shaft Collar,Set Screw,1Pc,1 In,SS

Shaft Collar, System of Measurement Inch, Bore Type Round, Bore Diameter 1 in, Bore Thread Size Not Applicable, Collar Outside Diameter 1 5/8 in, Inside Height to Flat Not Applicable, Clearance Diameter 1.63 in, Collar Width 5/8 in, Collar Material... more

Hillman Fas-n-Tite Sinker Nails 6d Sinker Nails 1-7/8 Vinyl C

Vinyl coated smooth shank for easier driving and strong holding powerNot recommended for use in treated lumber or where corrosion is a concernSinker Nail - Smooth Shank - Vinyl Coated - Checkered Flat Head - Thin ShankNails conform to ASTM F1667 and... more

Hillman Fasteners 240666 8 x 1 in. Exterior Flat Head One Screw - Bronze Epoxy Pack of 35

Engineered for optimum performance in multiple materials Power Pro ONE Flat-Head Multi-Material Screws are the ONE screw you ll ever need. Developed to outperform and replace standard wood sheet metal and concrete/masonry screws the One Screw... more

Manufacturer Varies SHCS SS M8-1.25 70mm L PK25 M51060.080.0070

Socket Head Cap Screw Head Type Flat System of Measurement Metric Drive Type Socket Drive Size 5 mm Material Stainless Steel Material Grade/Class 18-8 Finish Plain Thread Size M8-1.25 Minimum Thread Length 28 mm Fastener Length 70 mm Head Height... more

Manufacturer Varies SHCS SS M5-0.8 35mm L PK50 M51060.050.0035

Socket Head Cap Screw Head Type Flat System of Measurement Metric Drive Type Socket Drive Size 3 mm Material Stainless Steel Material Grade/Class 18-8 Finish Plain Thread Size M5-0.8 Minimum Thread Length 22 mm Fastener Length 35 mm Head Height 3.2... more

The Hillman Group 823470 Stainless Steel Flat Head Phillips Sheet Metal Screw #8 x 1-1/2-Inch 100-Pack

Flat head Phillips sheet metal screw. Stainless steel. 100-pieces per C-Pak. These sheet metal screws or tapping screws are highly versatile and are used to attached metal wood fiberglass and plastic. The sharp threads draw material together and... more

Manufacturer Varies SHCS SS M6-1 45mm L PK50 M51060.060.0045

Socket Head Cap Screw Head Type Flat System of Measurement Metric Drive Type Socket Drive Size 4 mm Material Stainless Steel Material Grade/Class 18-8 Finish Plain Thread Size M6-1 Minimum Thread Length 24 mm Fastener Length 45 mm Head Height 3.72... more

The Hillman Group 40058 8-Inch x 5/8-Inch Flat Head Phillips Wood Screw 100-Pack

A wood screw is a thread forming screw with sharp thread at a coarse pitch. It is used for directly fastening two wood surfaces. Wood screws have a smooth shank that allows the screw to pull the two pieces of wood together for a tight joint to... more

Hillman Wood Screws No. 8 X 3/4 Phillips Flat Head

8X3/4 WOOD SCREW more

Manufacturer Varies SHCS SS M8-1.25 90mm L PK25 M51060.080.0090

Socket Head Cap Screw Head Type Flat System of Measurement Metric Drive Type Socket Drive Size 5 mm Material Stainless Steel Material Grade/Class 18-8 Finish Plain Thread Size M8-1.25 Minimum Thread Length 28 mm Fastener Length 90 mm Head Height... more

Hillman Fasteners 40902 No. 6 x 1.25 in. Drywall Screw- Pack - 100

Features Drywall Screw. Pack - 100. Phosphate Finish. Hardened Steel. Flat Bugle Head. Fine Thread #2 Phillips Recess. Size - No. 6 x 1.25 in. Dimension - 2.8 x 2.8 x 0.39 in. Item Weight - 0.39 lbs. - SKU: TRVAL19715 more

The Hillman Group 40013 6-Inch x 5/8-Inch Flat Head Phillips Wood Screw 100-Pack

A wood screw is a thread forming screw with sharp thread at a coarse pitch. It is used for directly fastening two wood surfaces. Wood screws have a smooth shank that allows the screw to pull the two pieces of wood together for a tight joint to... more

Red Hound Auto 40 Flat Standard Washers Set Fits 3/8 inch .406 inch ID Hole Size .875 inch OD for 304 SS Stainless Steel Corrosion Resistant

Red Hound Auto Includes 40 stainless steel flat washers; Also known as plain washers these are the standard most commonly used type of washers; Size and Specifications: Fits 3/8 fasteners .406 inside diameter (ID or hole size) .875 outside diameter... more

Nickel-Plated Finishing Washers

Hillman Nickel-Plated Finishing Washer - Flat head screw recesses into the finish washer to provide a clean decorative appearance. - Size: #8 Material: Steel Finish: Nickel Type: Finishing Countersunk Diameter: 17/32 In. Inside Diameter: 13/64 In.... more

Hillman Wood Screws No. 8 X 1-3/4 Phillips Flat Head Box 100

The Hillman Group 40072 8-Inch x 1-3/4-Inch Flat Head Phillips Wood Screw 100-Pack more

Hillman 290033 Zinc Fender Washers 3/8 x 1-1/4 100 Pieces

Fender washer zinc finish. Pack of 100. 3/8 x 1-1/4 Fender washer Zinc plated steel 100 Pack. This fender washer is a flat washer with a thinner body and an increased outer diameter offering greater surface bearing. They are chosen when a large... more

Simpson Strong-Tie 5000167 No. 8 x 2 in. Lobe Flat Head Coated Stainless Steel Deck Screws 1 lbs - Pack of 128

The Deck Drive DWP Wood SS screw is a powerful fastening solution for deck dock and general exterior applications where extra corrosion protection is needed. With its specially designed sharp point and unique box threads the DWP is ideally suited... more

The Hillman Group 40063 8-Inch x 1-Inch Flat Head Phillips Wood Screw 100-Pack

A wood screw is a thread forming screw with sharp thread at a coarse pitch. It is used for directly fastening two wood surfaces. Wood screws have a smooth shank that allows the screw to pull the two pieces of wood together for a tight joint to... more

Hillman Binding Nails 5/8 Nickel Steel 16 Ga Viewpack 1-1/2 Oz

Hillman 5/8 in. L Binding Steel Nail Flat Head Smooth Shank 1 pk more

Deck Plus No.8 x 1.625 in. Star Flat Head Exterior Deck Screws - Pack of 1700

We are dedicated to give everyone the very best houseware products for all home needs with a focus on dependability our client satisfaction and great quality. We provide high-quality modern products to be enjoyed by many clients. Features No. 8 x... more

Phillips Flat Head Wood Screw

Hillman The Fastener Center Phillips Flat Head Wood Screw - Phillips flat head Steel Zinc chromate finish. - Size: #8 x 1-1/4 In. Material: Steel Head Type: Flat Drive Type: Phillips Finish: Zinc Thread Diameter: #8 Length: 1-1/4 In. Pkg Qty: 15... more

Hillman Wood Screws No. 8 X 1-3/4 Phillips Flat Head Box 100

Hillman The Fastener Center Wood Screw - Flat head Phillips drive. 100-pieces per box. - Flat head Phillips drive. 100-pieces per box. more

Hillman 240156 Carriage Bolt 3/8 x 2-Inch Steel Zinc-Plated Silver 100-Pack

Carriage Bolts are designed to fasten a wooden face to either a wood or metal frame. Its flat head is designed to eliminate the need for a washer and provide a semi-flush finish to applications. The square underside of the head is self locking to... more

Hillman 830506 Stainless Steel 3/8-Inch Flat Washers 100-Pack Single

Hillman Flat Washer Stainless Steel - Stainless steel flat washer is used to spread the load of a screwed fastening or when the hole is a larger diameter than the fixing nut. - Type: Flat Slot Size: 3/8 Inside Diameter: 7/16 Outside Diameter: 1... more

Hillman Wood Screws No. 8 X 2 Phillips Flat Head

Hillman No. 8 x 2 in. L Phillips Zinc Steel Wood Screw 8 pk Flat more

The Hillman Group 280052 Number-8 Flat Washer 100-Pack Steel 100

SAE flat washer zinc plated steel. Pack of 100. #8 SAE flat washer Zinc plated steel 100 pack. Used in applications with nuts and bolts. The flat washer provides a greater bearing surface which helps prevent a nut or bolt head from tearing through... more

Hillman Fastener Corp 811012 Flat Washer USS

Hillman Flat Washer USS Galvanized - Hot dipped galvanized. Suitable for use in treated lumber. - Size: 1/2 In. Material: Steel Finish: Hot Dipped Galvanized Type: Flat Diameter: 1-3/8 Inside Diameter: 9/16 Thickness: 0.086 /0.132 Pkg Qty: 130... more

Hillman No. 18 X 7/8 in. L Galvanized Silver Steel Cut Tacks 1.75 pk

Steel tack with relatively large head and sharp point. Fasten upholstery and carpet or perform other light fastening jobs. Single point design. Blued. A short sharp-pointed nail with a flat broad head. Ideal for hanging or holding down charts... more

Hillman 122591 Cut Tack NO 3 3/8 in L Steel Blue

Steel tack with relatively large head and sharp point. Fasten upholstery and carpet or perform other light fastening jobs. Single point design. Blued. A short sharp-pointed nail with a flat broad head. Ideal for hanging or holding down charts... more