ecoquality 10 inch round hammered

Small Clavos Round 7/16 inch Diameter Hammered Matte Black Finish (25 pack)

~Used to decorate cabinets doors gates and more ~One of our smallest clavos ~Perfect for cabinets and doors and furniture where wood thickness is critical ~Exclusive product of ours more

Small Clavos Round 7/16 Inch Diameter Hammered Matte Black Finish (25 Pack)

Older looking decorative nails or clavos..this is for a pack of 25 pieces Made of solid steel with matte black finish Finish is not shiny adding a more rustic appearance Nail length is 1/2 Easy to install just pre-drill small hole and hammer in more

2 Inch Round Hammered Unfinished Iron Decorative Door Nails Lot Of 6

Premium Iron Clavos 2 diameter head Made of iron Hammered head with some surface rust Strong welded nail shank This price is for a pack of 6 clavos more

Small Clavos Round 7/16 Inch Diameter Hammered Matte Black Finish (25 Pack)

Older looking decorative nails or clavos..this is for a pack of 25 pieces Made of solid steel with matte black finish Finish is not shiny adding a more rustic appearance Nail length is 1/2 Easy to install just pre-drill small hole and hammer in more

Small Clavos Round 7/16 inch Diameter Hammered Matte Black Finish (25 pack)

~Used to decorate cabinets doors gates and more ~One of our smallest clavos ~Perfect for cabinets and doors and furniture where wood thickness is critical ~Exclusive product of ours more

90293 10-32-Inch x 1/2-Inch Round Head Combo Machine Screw 100-Pack 0.5 inches zinc

Fasten with a driver to reduce of over-tightening to and fastened material If nuts are needed use with nuts of same finish and threading for proper fit Zinc Plated Country of :China more

90293 10-32-Inch x 1/2-Inch Round Head Combo Machine Screw 100-Pack 0.5 inches zinc

Fasten with a driver to reduce of over-tightening to and fastened material If nuts are needed use with nuts of same finish and threading for proper fit Zinc Plated Country of :China more

90293 10-32-Inch x 1/2-Inch Round Head Combo Machine Screw 100-Pack 0.5 inches zinc

Fasten with a driver to reduce of over-tightening to and fastened material If nuts are needed use with nuts of same finish and threading for proper fit Zinc Plated Country of :China more

The Hillman Group 90230 10-24-Inch x 1/2-Inch Round Head Combo Machine Screw 100-Pack

Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten metal parts together. Measured from the underside of the head to the tip of the screw to obtain fastener length. If nuts are needed use with nuts of the same... more

The Hillman Group 90293 10-32-Inch x 1/2-Inch Round Head Combo Machine Screw 100-Pack

Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten metal parts together. Measured from the underside of the head to the tip of the screw to obtain fastener length. If nuts are needed use with nuts of the same... more

Grip Rite Prime Guard 1210GAB50 Grip Rite Hot Dipped Galvanized Anchor Bolt with Nut and Round SAE Washer 1/2-inch by 10-inch 50 per box

Grip Rite Prime Guard 1210GAB50 Grip Rite Hot Dipped Galvanized Anchor Bolt with Nut and Round SAE Washer 12-inch by 10-inch 50 per boxPrimeSource Bright Anchor bolts are for attaching bottom plate or sill plate to newly poured concrete . This product... more

90251 10-24-Inch x 1-3/4-Inch Round Head Combo Machine Screw 100-Pack zinc

Fasten with a driver to reduce of over-tightening to and fastened material If nuts are needed use with nuts of same finish and threading for proper fit Zinc Plated Country of :China more

Grip Rite Prime Guard 1210AB50 Grip Rite BRIGHT Finish Anchor Bolt with Nut and Round SAE Washer 1/2-inch by 10-inch 50 per box

Prime Source BRIGHT Anchor bolts are for attaching bottom plate or sill plate to newly poured concrete foundations. This product meets ASTM A307 specifications. PrimeSource Bright Anchor bolts are for attaching bottom plate or sill plate to newly... more

Grip Rite Prime Guard 1210GAB50 Grip Rite Hot Dipped Galvanized Anchor Bolt with Nut and Round SAE Washer 1/2-inch by 10-inch 50 per Box

Grip Rite Prime Guard 1210GAB50 Grip Rite Hot Dipped Galvanized Anchor Bolt with Nut and Round SAE Washer 1/2-inch by 10-inch 50 per Box more

90251 10-24-Inch x 1-3/4-Inch Round Head Combo Machine Screw 100-Pack zinc

Fasten with a driver to reduce of over-tightening to and fastened material If nuts are needed use with nuts of same finish and threading for proper fit Zinc Plated Country of :China more

Baron 341-3/8 Spring Snap 3/8 Inch Rigid Fixed Round Eye 2 Inch Overall Zinc Plated Malleable Iron (Case of 10)

Snap Hook 30 lb Weight Capacity Snap Opening Size: 3/16 in Steel Zinc 1-7/8 in L DimensionsBARON Snap Hook 30 pounds Weight Capacity Snap Opening Size: 3/16 in Steel Zinc 1-7/8 in L Dimensions more

Grip Rite Prime Guard 1210GAB50 Grip Rite Hot Dipped Galvanized Anchor Bolt with Nut and Round SAE Washer 1/2-inch by 10-inch 50 per box

Hot dipped Galvanized Bolts are recommended when working with treated lumber. This product meets ASTM A307 specifications. PrimeSource Bright Anchor bolts are for attaching bottom plate or sill plate to newly poured concrete foundations. This product... more

Prime Guard 1210GAB50 Hot Dipped Galvanized Anchor Bolt With Nut Round SAE Washer 1/2-Inch By 10-Inch 50 Per Box

Hot galvanized more

50 Pack - 1� Gold Decorative Clavo Nails Round Hammered Iron Antique Rustic Finish

Specifications: 1� Inch x 1� Inch x .75 Inch (25.4.1mm x 25.4 mm x 19.05mm) Weight .2oz 5.4g Sidco Supply’s exquisite collection of 1� Hammered Antique Vintage Clavo Nails where timeless elegance meets rustic charm. These handcrafted decorative... more

Ana 10 Pcs Brazing Rods Solid Brass Rods Round Brass Stock Pin Brass Brazing Rods Brass Knife Pins Brass Bar Stock for DIY Craft Drift Punches Knife Handle Lathe Diameter 1.6 mm Length 9.84 Inches

Features: brand new and high quality Made of high-quality materials durable It is mainly used for welding between copper and iron and needs to be used with solder powder For brass oxygen-acetylene gas welding and carbon arc welding as a filler material... more

10 Middle Mount Brackets for 1-5/16 inch Round Closet Rods - Chrome Plated

These 10 middle mount brackets are engineered to fit 1-5/16 inch round closet rods. Made of steel and chrome plated for a polished look. more

ProSource LR346 Round U-Bolt Plate & Nuts #573 5/16 By 2 By 3 Inch Zinc Plated Steel (Case of 10)

Key Features;Zinc finish;5/16 in Thread;Made of steel;U bolts steel 5/16 diameter thread zinc plated with nuts bulk width by length 2 inch by 3ProSource U-Bolt 5/16 in Thread Inside Length: 2 in Inside Width: 3 in Steel Zinc Includes: Nut more

Metallics JRM32 Zinc Chromate Steel Phillips/Slotted Drive Round Head Machine Screw #10 x 1/2 Inch

Metallics Combo round head machine screw measuring 1/2 Inch x size 10 Dia has UNC threading of size 10 - 24. It has size 2 slotted/Phillips drive. This screw in zinc chromate finish features steel construction. more

Fule 10 Pcs Brazing Rods Solid Brass Rods Round Brass Stock Pin Brass Brazing Rods Brass Knife Pins Brass Bar Stock for DIY Craft Drift Punches Knife Handle Lathe Diameter 1.6 mm Length 9.84 Inches

Features: Made of high-quality materials durable It is mainly used for welding between copper and iron and needs to be used with solder powder For brass oxygen-acetylene gas welding and carbon arc welding as a filler material It is also widely used for... more

Cabentry Brand | Wood Screws | Round Washer Head | Phillips Square Drive | #10 | 3 Inch | Deep Thread | Dual Cutter | Zinc Finish | 1000 Pack

Cabentry s full line of wood screws is the perfect solution for assembling cabinets or furniture. Fasteners from Cabentry are available in a wide range of sizes drives and finishes. Cabentry can serve the needs of customers large and small. more

Self -Clinching Nuts #10-32x0.12-Inch Carbon Steel Rivet Nut Round Head Steel Metal Sheet Mounting Fastener 100pcs

Specification: Size:#10-32 Material: Carbon Steel with Zinc Plating Outer Diameter(Max): 8.64mm/0.34inch; Outer Diameter(Min): 6.32mm/0.25inch; Mounting Hole Diameter: 6.32mm/0.25inch; Length: 3.05mm/0.12inch; Surface treatment: Passivation Package... more

Metallics JRM93 Zinc Chromate Steel Phillips/Slotted Drive Round Head Machine Screw #10 x 1 Inch

Metallics Combo round head machine screw measuring 1 Inch x size 10 Dia has UNC threading of size 10 - 24. It has slotted/Phillips drive. This screw in zinc chromate finish features steel construction. more

ProSource LR362 Round U-Bolt Plate & Nuts #533 5/16 By 1-3/8 By 2-1/2 Inch Zinc Plated Steel (Case of 10)

Key Features;Zinc finish;5/16 in Thread;Made of steel;U bolts steel 5/16 diameter thread zinc plated with nuts bulk width by length 1 3/8 inch by 2 1/2ProSource U-Bolt 5/16 in Thread Inside Length: 2-1/2 in Inside Width: 1-3/8 in Steel Zinc Includes: Nut more

ProSource LR365 Round U-Bolt Plate & Nuts #567 5/16 By 1-3/4 By 4-1/8 Inch Zinc Plated Steel (Case of 10)

Key Features;Zinc finish;5/16 in Thread;Made of steel;U bolts steel 5/16 diameter thread zinc plated with nuts bulk width by length 1 3/8 inch by 4 1/8ProSource U-Bolt 5/16 in Thread Inside Length: 4-1/8 in Inside Width: 1-3/8 in Steel Zinc Includes: Nut more

Self -Clinching Nuts #10-32x0.12-Inch Stainless Steel Rivet Nut Round Head Steel Metal Sheet Mounting Fastener 100pcs

Specification: Size:#10-32 Material: Stainless Steel Outer Diameter(Max): 8.64mm/0.34inch; Outer Diameter(Min): 6.32mm/0.25inch; Mounting Hole Diameter: 6.32mm/0.25inch; Length: 3.05mm/0.12inch; Surface treatment: Passivation Package Content: 100Pcs x... more

Charles Leonard Fasteners Round Head Brass Plated 1 Inch Shank 10 MM Head 100-Pack (4R-BP)

100% new product Bright brass plated finish. Rigid shanks and sharp points for easy penetration. Wide heads prevent fasteners from pulling through punched holes. We guarantee the satisfaction of our products through high quality and service low prices... more

(Pack of 10) Caplugs 1-3/8 to 1-7/16 Round Black Vinyl Flexible End Cap Bolt Screw Rubber Thread Protector Safety Cover | for 1.375 Inch Pipe Post Tubing Rod OD Protective Cover

(Pack of 10) Caplugs 1-3/8 to 1-7/16 Round Black Vinyl Flexible End Cap Bolt Screw Rubber Thread Protector Safety Cover for 1.375 Inch Pipe Post Tubing Rod OD Protective Cover more

Self -Clinching Nuts #10-32x0.18-Inch Carbon Steel Rivet Nut Round Head Steel Metal Sheet Mounting Fastener 50pcs

Specification: Size:#10-32 Material: Carbon Steel with Zinc Plating Outer Diameter(Max): 8.64mm/0.34inch; Outer Diameter(Min): 6.32mm/0.25inch; Mounting Hole Diameter: 6.32mm/0.25inch; Length: 4.5mm/0.18inch; Surface treatment: Passivation Package... more

PTO Shaft Locking Hitch Pin 1/4 x 1-3/4 Inch with Round Wire Retainer Clip (Pack of 10)

10-Pack PTO Shaft Locking Hitch Pin with Round Wire Retainer Clip. Round spring clasp locks securely over end of pin to keep pin in place and easily pulls off for quick release. Yellow Zinc Dichromate plating is corrosion resistant preventing rust for... more

Self -Clinching Nuts #10-32x0.13-Inch Stainless Steel Rivet Nut Round Head Steel Metal Sheet Mounting Fastener 100pcs

Specification: Size:#10-32 Material: Stainless Steel Outer Diameter(Max): 8.64mm/0.34inch; Outer Diameter(Min): 6.32mm/0.25inch; Mounting Hole Diameter: 6.32mm/0.25inch; Length: 3.25mm/0.13inch; Surface treatment: Passivation Package Content: 100Pcs x... more

Metallics JRM33 Zinc Chromate Steel Phillips/Slotted Drive Round Head Machine Screw #10 x 1/2 Inch

Metallics Combo round head machine screw measuring 1/2 Inch x size 10 Dia has UNF threading of size 10 - 32. It has size 2 slotted/Phillips drive. This screw in zinc chromate finish features steel construction. more

Brass Solid Round Rod Lathe Bar Stock 5mm in Diameter 25cm/10 inch in Length Brass Metal Materials Multipurpose

Description: This material is brilliant for milling turning and drilling purposes. Perfect for the model engineer and machinist. Suitble for high speed machining operations and intricate parts of manufacture It is the combination of machinability... more

Self -Clinching Nuts #10-32x0.18-Inch Carbon Steel Rivet Nut Round Head Steel Metal Sheet Mounting Fastener 100pcs

Specification: Size:#10-32 Material: Carbon Steel with Zinc Plating Outer Diameter(Max): 8.64mm/0.34inch; Outer Diameter(Min): 6.32mm/0.25inch; Mounting Hole Diameter: 6.32mm/0.25inch; Length: 4.5mm/0.18inch; Surface treatment: Passivation Package... more